====== SIP Products ======

See the page on [[configuration]] before configuring your SIP device to use VoIP.co.uk.

There are a list of [[requirements]] your SIP device must meet in order for it to function with VoIP.co.uk.

===== SIP Enabled PBX Systems =====

  * [[Avaya]]
  * [[Cisco]]

===== Hard Phones =====

  * [[Snom]]
  * [[Grandstream]]
  * [[Linksys]]
  * [[Avaya]]
  * [[Cisco]]
  * [[Mitel]]
  * [[Safecom]]

===== Soft Phones =====

  * [[eyeBeam]] (and X-Lite)


===== Routers/ATAs =====

  * [[Draytek]]
  * [[Safecom-Guru-Billion-Origo]]
  * [[Thomson Speedtouch]]
  * [[Cisco]]

===== Applications =====

  * [[Asterisk]]

===== Generic Settings =====

these settings are generic values that may be requested by devices.  If you device is listed in the section above, then you should follow those instructions instead of these:

| **Proxy Server**     | proxy.voip.co.uk |
| **Registrar Server** | proxy.voip.co.uk |
| **Outbound Proxy**   | proxy.voip.co.uk |
| **Use SRV**          | YES |
| **Username**         | //your 6 digit SIP username// |
| **Identity/Auth ID** | //your 6 digit SIP username// |
| **Password**         | //your SIP password// |
| **STUN**             | No |

There should be no references in any field to just **voip.co.uk**, all values should be **proxy.voip.co.uk**.  this is very important!

Your device will //just work// behind NAT.  You should not open any special ports on your firewall or perform any port forwarding.

STUN support in **all** devices should be disabled.